HFJ11-E1G11E-L12RL , LPJG4826GENL RJ45 Single Port 10/100/1000TX Mbps
FastJack ™ 1x1 Tab-Down Gigabit Short Body RJ45 HFJ11-E1G11E-L12RL
1.Gigabit (10/100/1000) Ethernet RJ45
2. LINK-PP LPJG4826GENL Cross HFJ11-E1G11E-L12RL
3.350uH min OCL at 8mA DC Bias Across the Full Temp Range
4.30µ” Gold Plating (min) on Contacts
5.100% Compliance Testing
6.1500Vrms Hi-Pot
FastJack ™ 1x1 Tab-Down Gigabit Short Body RJ45 , Meeting IEEE 802.3
1. Product Type Features:
1) Product Type = Connector
2) Jack Type = RJ45
3) Profile = Standard
4) PCB Mounting Orientation = Side Entry (Right Angle)
2. Mechanical Attachment:
1) Jack Configuration = 1 x 1
3. Electrical Characteristics:
1) Shielded = Yes
4. Termination Related Features:
1) EMI Finger - Bottom = Without
2) Termination Method = Solder
5. Body Related Features:
1) Port Configuration = Single/Multi
2) EMI Fingers -Top and Sides = With/ Without
3) Latch Orientation = Standard - Latch Down
4) PCB Tail Length
6. Contact Related Features:
1) Preloaded = Yes
2) Contact Termination Type = Through Hole/Surface Mount
7. Housing Related Features:
1) Connector Style = Jack
8. Industry Standards:
1) RoHS/ELV Compliance = RoHS compliant, ELV compliant
2) Lead Free Solder Processes = Wave solder capable to 240°C,
Wave solder capable to 260°C, Wave solder capable to 265°C
Reflow-Soldering Optional;
3) RoHS/ELV Compliance History = Always was RoHS compliant
9. Identification Marking:
1) Left LED Color (Position #1) = Green - 250 ohm resistor
2) Right LED Color (Position #2) = Green - 250 ohm resistor
10. Conditions for Usage:
1) Applies To = Printed Circuit Board
2) Environmental Conditions = Office / Premises
3) Operating Temperature (°C ) = 0 - 70/-40 - +85
11.Hipot:
1500Vrms MIN
| NOTES: | | | |
| 1.Designed to support application,such as SOHO(ADSL |  |
| modems),LAN-on-Motherboard(LOM),hub and Switches. |
| 2.Meets IEEE 802.3 specification |
| 3.Connector Materials: |
| Housing: Thermoplastic PBT+30%G.F UL94V-0 |
| Contact: Phosphor Bonze C5210R-EH Thickness=0.35mm |
| Pins: Brass C2680R-H Thickness=0.35mm |
| Shield: SUS 201-1/2H Thickness=0.2mm |
| Contact plating: Gold 6 micro-inches min.In contact area. |
| 4.Wave solder tip temperature: 265℃ Max, 5 Sec Max |
| 5.UL Certification: File Number E484635 |
Product Tags:
|
|
HFJ11-E1G11E-L12RL , LPJG4826GENL RJ45 Single Port 10/100/1000TX Mbps Images
|
